This is a top of the line Helicopter!! (2.4G)- With Alumi case add $59.99.

This new SKYARTEC's 6CH WASP 200XE V4 Helicopter is designed to be a high performance, ease of
control, stable, durable, and lightweight helicopter. It's adopts PPM control component , metal swashplate,
metal tail rotor wheel box set, Belt driven system and professional gyro, which ensure the helicopter react
fast on any kind of 3D acrobatic flying courses and fllight stability.

Furthermore, the WASP 200XE V4 is equiped with the latest radio control set, high quality CNC alloy rotor
head/frame and matched with high performace 4500KV Brushless Motor , Brushless ESC, and Li-Po Batttery.

The WASP 200XE V4 is the perfect choice for both the beginners and experts due to its compact size,
stability, and agility. Also, the WASP 200XE V4 is suitable for indoor,outdoor,backyard and stadium flying.

It can be flown easily near the ground, and is highly damage-resistant. It has been designed to allow people
to learn to fly before moving to the next very expensive models. The WASP 200XE V4's light and handy
design fits for the beginners due to small body and good stability. Expert pilots will also enjoy this model
however, because it can be operated in small rooms, garages etc.





Product included:

Wasp 200XE CF helicopter; 18A brushless speed controller; head locked gyro; four servos; 4500kv
brushless motor; TX/RX (2.4g) ; 11.1V 900mah LI-PO battery and balance charger; fiberglass canopy





Feature:

adopts PPM control component , metal swashplate, metal tail rotor wheel box set, tail rotor and Belt
driven system, professional gypo, which ensure the helicopter react fast on any kind of 3D acrobatic
flying courses and fllight stability.

2.4 GHz, 7 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control
(RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE) New radio control set

High Performace 4500KV Outrunner Brushless Motor used as the main drive and makes the flight
much stable and better performace

High quality CNC alloy rotor head

Can fly in skyway, backward, and 3D aerobatic

PPM mixing control system and collective pitch structure

120 degree PPM system provides precise movement if comparing with the traditional mechanical
mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced
Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing

Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic
responds

The autorotation landing system, made of high quality one-way bearing, maximally protects your helicopter
from damage

Hard, Light weight Wooden Main Blades

Brand new design for the structure

Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of
flying

Tail rotor driven by belt provide stable flight and low noise

NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas-Helicopter

No need to worry about burning tail motors

Outer placed Head Lock Gyro

11.1V 900mAh high capacitance Li-Po battery provide enough power for any aerobatic flight

With length-adjustable servo push-rod, precision sub trim can be easily set

Separate main shaft and main gear reduce repair time and noise

Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and canopy reduce the load of
whole helicopter

Easy to fly and more stable lifting

PPM receiving and transmitting system increases the operation stability

PPM mode with adjustable pitch system and 3D conversion

Provide excellent performance outdoor and indoor

Tail blade adopt flameout landing system

Newly Designed Rotor Head gives better control

Pre position servo mounts have been added in this helicopter, servos can be mounted solidly by screw and
easy to install

Extreme smooth control and stable flight

Precise controlling and hovering

Digital Proportional Motor Speed Control

Suitable for Indoor/Outdoor/Backyard/Stadium

Using the Ultra tough Carbon Fiber and Aluminum Alloy materials, the Helicopter does have very strong
structure. In addition, the main rotor blades are using top quality wood materials, which is extremely light
and not easily break

Approximately 15 minutes flight time on each charge - Optional Li- poly battery will help to achieve better
performance and longer flight time.

Best choice for Beginner - Advanced hobbyist

All spare parts and accessories are available

Complete Kit, Ready to Fly (Everything is included and 100% assembled -- 8 AA batteries for the
transmitter not included)





Specification:

Main Rotor Diameter: 470mm

Length: 460mm

Flying Weight: 360g

Driven system: Skyartec 4500KV brushless motor

Gyro: Skyartec Head Lock

Servo: 3X Skyartec 8g + 1X Skyartec 5g

ESC: Skyartec 18A

Battery: Skyartec 11.1V 900mAh Lithium Li-Po

Control system: Skyartec 2.4 GHz, 7CH PPM Multifunctional FM Transmitter & Receiver

Radio Control Range: 2500 feet (762m)